How can you save electricity and reduce light accounts?

Excites the most of the electricity saving.People continue to search for how to make it more effective (and yet unknown) ways.We will share effective ways today.

Of course, some of these methods are obvious, and many have used them for a long time, but despite the cautious consumption of electricity and are obtained in a small instruction and existing information.

Method 1. Do we really need so many light?

How to save electricity

All - claims that it is spent on the lighting of all 14% of all the generated electricity.But are we always using this incredible amount of extra energy without harming ourselves?How to learn how to learn this?

These simple tricks can help you in this work:

  • Use the electric light as much as possible.Despite people's lifestyle, we call on in primary time (this, in course, the health of health and artificial lighting in the health and artificial lighting proved to be more exacerbated).
  • Remember, the rate of lighting the room is affected by how much lighting device is contaminated.Obviously, a few months will be covered with a plastic dust and oil layer in the washed kitchen and the light will be very bad.Pure lighting devices significantly illuminate the room, ie you can use open bulbs.
  • Don't forget clean windows.Natural light and sunshine will not delay your time to burn only lighting devices, but also warm your room in the cold season.
  • Room, for example, combined lighting, combined lighting can be used in combined lighting: At the same time, do not turn on all the bulbs in the chandelier (floor lamp) and 1-2 bulbs from a chandelier.
  • Modern energy management devices can help in the economy of electricity: dimmer (light-changing lights), motion sensors, impulse relay, digital switches.The installed automatic parcel system works very effective in access.
  • We use energy-management light (compact fluorescent, LED).
  • And very simple - turn off the light when you leave the room (in fact, it is likely to "have a" war "in many homes, because everyone forget to turn off the light).

A little about energy advantages -

  • The more effective electricity consumption (energy is consumed 4-5 times less when compared with incandescent lamps).
  • The output of the great light: an energy-safe lamp, which is 12 W capacity in terms of light intensity, is equal to 60 watts of an ordinary incandescent lamp.
  • It does not exploit a large amount of thermal energy (this property can be used in small lighting devices) and lightly and gently (ordinary light is not more than 10% of the light, heating in heat, not more than 10% of light).
  • Energy Life's life is a rule, light bulbs, taller.Although the announced manufacturer's service period does not always match.

It is true that the second is sometimes because we do not use several types of energy, lamps.Most of the time they are often used in places where the regime is used and the regime is often changed: "Opened" - "OFF".

Ways to save electricity

If you make a staged change of light bulbs, the bulbs are good to start the rooms where it works for a long time.In addition, often voltage, high or vice versa, very low temperatures, much affect the work cycle.It should not forget that some energy lamps (fluorescent) cannot be used by the regulation of lighting glare.

Over time, we have to completely pass energy-saving bulbs, because the law of energy protection is completely replaced by incandescent lamps and replaced with more economic sources.Therefore it is better to start doing it in advance, because it is put to replace all the bulbs immediately.

Undoubtedly the lack of energy saving light lamps is still a high price (now, 3-4 years ago, 3-4 years ago), not quality, and unfortunately, and such deposits are very dangerous for our environment).

Well, if you can't replace the usual energy, light bulbs, at least use small bulbs.

Method 2. Very -Trifter meters

The question of using multi-spotting counters is certainly unequivocally.However, several home appliances are operating (refrigerator) or almost constantly in "sleep, computers), and then, it can be useful for fans who do not work only at night.

In addition, the modern multi-spotting meters take into account more accurate electricity than induction.

Method 3. Useful savings

Let's think we use the home appliances properly?

For many of us, we will be disappointed with the result of these thoughts.Experts often consume more electricity than necessary for normal work.

As we have already detected, many minibuses, televisions, televisions, electricity and video equipment, water heaters, air conditioners and one of them) are consumed in "standby" mode or "sleep" mode.

Each of these devices consumes a separate very electricity.However, if you summarize the consumption of all devices operating in our apartments in "sleep" mode, it is generally not taken in small quantities for payment.

Thus, for example, for television, working hours in the average "Waiting" mode, 19 hours, microwave-23.8 hours, for a compact vial for a compact vial a day for a compact vial.

As a result, this is 5-10% of the total electricity consumption in the apartment.

And what is the way out?And the output is very simple.Always turn off your devices from the non-used exit.

Method 4. Wonders of technology

Methods to maintain electricity

Obviously, for everyone: you can't save a lot with an old refrigerator or TV.15-20 years ago, household appliances consume electricity twice as much.

The way out of this situation: to get modern energy and ineffective household appliances.How to find this or how effective energy is this device?

To do this, explore the energy efficiency label with home appliances carefully.There are letter signs for this (highest energy efficiency) G (lowest).

In modern devices, electricity consumption in "waiting" mode is less than worn models.

As an inefficient example of energy, for example, automatically detergent, automatically dose water consumption, "smart" dishwashers or washing machines, select the mode you want.According to experts, such devices consume more energy and 62% of water from obsolete models of the late 90s.

It is not worth convincing the advantages of modern technology.But if everyone does not allow former household appliances with new (usually expensive)?How can I reduce electric costs in this situation?

Method 5. We use what we have

Refrigerator

How to use the refrigerator, you probably know everyone.However, we stubbornly continue to put it next to the battery near the batteries, stoves, or the sun.

However, it is obvious that they will consume more electricity from the refrigerator heated for effective work from nearby heat sources.

In addition, in the room where the refrigerator stands is not hot (about 18-20 degrees), the refrigerator should not be released from the ice and removed from the ice.

You should also not get a big refrigerator because it is the same as a neighbor in fashion or kitchen (the number of members of your family and the number of those in need).The larger the refrigerator consumes energy.

Vacuum cleaner

Take into account the use of a vacuum from a vacuum to normal operation with fewer electricity consumption (15-20% of dirty is consumed) and use the electricity when extinguished.

Electric stove

The electric stove consumes many electricity.In this case, how can I reduce electricity costs:

  • If the oven is heated in advance, if this dish is not intended for a recipe to cook.
  • Use the residual temperature of the fireplace (5-10 minutes before the end of cooking).
  • Tie the pots with lids.
  • Do not use water anymore when cooking vegetables and eggs.
  • Use good meals with a flat-attached bottom and burner size.
  • Use pressure chefs.
  • When buying a volume of electric teats for the whole family, the electric teapot consumes less than an electric oven (which is enough water for the whole family and pours water as much as you use.
  • Use the microwave oven and toasters that you can cook the same extent and crisp dish in a few minutes of the oven.But this is faster and therefore more economical.

Washing machine

The washing machine spends up to 15% of home electricity.Use all the opportunities of economic power consumption provided with instructions for washing machine:

  • Quick and economic detergent modes.
  • Full load, but excessive loading (excessive loads increases the consumption of electricity by 10%).
  • Low temperature (should not be washed at high temperatures).
  • Properly selected operating mode of the machine.

Iron

  • You can also use the residual heat principle, ie 5-10 minutes from iron to the end of the iron.
  • Linen Drying: You will have to spend more time to shoot and therefore use more electricity.
  • Unexpected canvas will also require additional electricity consumption.
  • Use irons with automatic closing function.
  • Use the modes correctly to iron different types of fabric.

Air conditioning

  • Set the temperature that is enough to cool the room properly.
  • Be sure to close all windows and doors before you turn on.
  • Take care of the number of room size and inside when buying air conditioners.The device designed for a large area is simply "Eat" electricity without any benefits.
  • Clean fans and filters on a regular basis.

Computers

Almost everyone has computers today and is not in the family.And it is clear that this is significantly increasing its electricity costs.

What can we do?

  • Reduce the brightness of the monitor (this affects energy consumption).
  • If you do not use it for a long time, turn off the computer.
  • Turn all peripheral devices (scanners, printers, modems) through the network filter and always turn off when these devices do not work.
  • If possible, use liquid crystal monitors.
  • Use a laptop more often (less energy than this "stationary computer).

Heaters

The cold in the street and at home gets us from the pantries.No heat at home?What to do?Refrain and refrain from getting sick.Thus, you must include "eating" electricity - heaters.

You need to insulate everything possible to use the heater somehow: Windows, walls, floors, etc.Of course, plastic windows make this task well.Well, if the windows are ordinary, try to close all the cracks and cracks in the window frame.Up to 50% heat disappears.The same thing should be done with the front doors.

If the central heat is already opened, is it still cold?

Can cause a lot.However, in some cases, simple washing of old batteries can help or increase heat transfers due to the increase in additional units.

Well, try to use heaters, if possible, very "snowy" to avoid use.

You can also consider a heated towel rail with a hot water supply as an additional heat source option in the apartment.

It's interesting about the same

Electric saving device

There is a very useful device.This is called "home vattmetri".

Why do you need?Will help save electricity.With the help of this small device, you can learn very interesting things about home appliances and electricity costs in general.

For example:

  • How much do you exceed the whole day for a computer that doesn't close?
  • How much electricity does your refrigerator consume and it's time to change it to a new one?
  • Washing foods in dishwashers, washing your laundry, how much electric consumed in your hair, or drying your hair?
  • How much energy does television consume in case of off?

You will receive answers to all these questions and many and learn how much electricity can be saved.

It is clear that it is not difficult to save electricity.The main obstacle is likely to be ourselves.After understanding that we do not waste electricity, we will first succeed for us.